As technology advances we see the need of continuing our efforts to conserve water. We have recently changed our pre rinse valves from a 2.65 gpm, to a T & S Brass of 1.24 gpm, we made an entry in our blog about the potential savings with that valve. Two weeks ago we were given by National Grid, 3 Bricor BO64 PRV that restricts the flow of water to 0.64 gallons per minute, there is more pressure on the rinse and we are expecting to cut in a half our average pre rinse hot water consumption now, so we are going from 1.24 gpm to 0.64 gpm, we expect additional savings in water, sewer and gas.
Taranta Accessibility Statement
Taranta Restaurant is committed to facilitating the accessibility and usability of its Web site, tarantarist.com for all people with disabilities. Working with a web accessibility consultant, we are implementing over time the relevant portions of the World Wide Web Consortium's Web Content Accessibility Guidelines 2.0 Level AA (WCAG 2.0 AA) as its web accessibility standard, which will also brings our website into conformance with the Section 508 Web Accessibility Standards developed by the United States Access Board (Section 508). Our website will be tested on a periodically to make sure it is kept up to standards.
Below are some of the steps we are taking under our accessibility policy:
We have engaged an experienced web accessibility consultant, to conduct a website accessibility audit and provide us with specific recommendations to facilitate website accessibility and conformance with WCAG 2.0 AA standards. On an ongoing basis, we will have periodic website accessibility audits conducted in order to provide feedback to us regarding conformance with WCAG 2.0 AA standards.
Contact us with your accessibility questions.
Please be aware that our efforts are ongoing. If, at any time, you have specific questions or concerns about the accessibility of any particular Web page on tarantarist.com, please Contact us. If you do encounter an accessibility issue, please be sure to specify the Web page in your email, and we will make all reasonable efforts to make that page accessible for you. Please also feel free to call us and let us know how we can help you. We are here to service our community.
As technology advances we see the need of continuing our efforts to conserve water. We have recently changed our pre rinse valves from a 2.65 gpm, to a T & S Brass of 1.24 gpm, we made an entry in our blog about the potential savings with that valve. Two weeks ago we were given by National Grid, 3 Bricor BO64 PRV that restricts the flow of water to 0.64 gallons per minute, there is more pressure on the rinse and we are expecting to cut in a half our average pre rinse hot water consumption now, so we are going from 1.24 gpm to 0.64 gpm, we expect additional savings in water, sewer and gas.